Care & Maintenance 4. Allow the HEPA filter to thoroughly dry for at least 24 hours. 2. Reinstall the dust compartment. Cleaning the High Torque Brush Bar 1. Turn the lock counterclockwise until it stops, then remove the roller brush from the high torque brush bar. 3. After extended use, the roller brush may become dirty and should be washed. 1 Installing the HEPA Filter 1. Insert the HEPA filter into the vacuum cleaner and gently press down, as illustrated. 4. After washing, allow the roller brush to dry thoroughly by standing it upright in a well-ventilated area for at least 24 hours. 2. Use scissors to cut and pick out any hair or other debris tangled around the roller brush.
Wipe away excess dust from the slot and clear plastic cover using a dry cloth or paper towel. Insert until it clicks into place 2 16 17