Daily Care & Maintenance Enabling/Disabling Wi-Fi Warning: Make sure the purifier is turned off and unplugged before performing the following operations. Simultaneously press and hold the mode switch button on the display and the display on/off button for 7 seconds. The purifier will make a notification sound and the Wi-Fi will be disabled. While the Wi-Fi is disabled, simultaneously press and hold the mode switch button on the display and the display on/off button for 7 seconds. The purifier will make a notification sound and the Wi-Fi will be enabled. Cleaning fan blades and air duct · Press the indentation on the cover to open it.
Use a screwdriver to loosen the screw, and then pull the cover upwards to remove the grille. · Use a vacuum cleaner to remove any dust from the air duct and fan blades, or wipe the dust off gently with a soft cloth. · Use a brush or soft cloth to gently wipe the negative ion transmitter. · Install the grille back and fasten the screw after cleaning. Note: To avoid missing, the screw is not removable. Loosen the screw to remove the grille. 025 Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. *The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version. Negative Ion Transmitter A4E9BC43 7 Connect wit This product Control your Connect wit This product Control your h Mi Home/Xiao works with Mi Hom device with Mi Hom Scan the QR code to d will be directed to the c app is installed already. Home" in the app store mi Home App e/Xiaomi Home app e/Xiaomi Home app ownload and install the app. Y onnection setup page if the Or search for "Mi Home/Xiao to download and install it. Note: To avoid damaging the the air duct and fan blades di with a soaking wet cloth. puri rect