en For your safety W W Risk of injury from sharp blades/rotating drive! Never place fingers in the attached blender! Operate the assembled blender only and with the lid attached. W W Risk of scalding! If processing hot liquids, steam escapes through the funnel in the lid. Add a maximum of 0.5 litres of hot or frothing liquid. W W Important! Use the appliance with original accessories only. When using the accessories, follow the enclosed operating instructions. Use only one tool or accessory at any one time. W W Explanation of the symbols on the appliance or accessory i Follow the instructions in the operating instructions. Y Caution! Rotating blades. W Caution! Rotating tools.
Do not place fingers in the feed tube. W W Important! It is essential to clean the appliance thoroughly after each use or after it has not been used for an extended period. X “Cleaning and servicing” see page 23 Safety systems Overload protection If the motor switches itself off while the appliance is being used, the overload pro- tection feature has been activated. A possi- ble cause may be that too much food was processed at one time. If a safety system is activated, see “Troubleshooting”. The operating instructions describe several models, see also overview of models (Fig. M ) . The appliance requires no maintenance. Start lock-out See “Operating positions” table.
The appliance can be switched on in pos. 1 and 3 only: ■ ■when the bowl (11) has been inserted and turned until it locks into place and ■ ■the blender drive cover has been attached (8). Restart lock-out If the power is interrupted, the appliance remains switched on but the motor does not start running again when the power is restored. To switch the appliance on again, turn the rotary switch to P , then switch on. 19 124_MUM58xxx_8001027214.indb 19 27.11.2015 15:11:45