HOME 2. Using clips, attach clutch fluid line to right lower frame rail. See 2.13 CLUTCH FLUID LINE . finger tighten cross member mounting bolts (5) and washers (4). Tighten to 20-26 Nm (15-19 ft-lbs) See 5.8 RADIATOR AND OIL COOLER . 3. Attach the engine mount stabilizer link to the frame tab. Tighten to 34-41 Nm (25-30 ft-lbs) See 2.4 FRONT ENGINE MOUNT . 6. Tighten lower frame rail bolts (7) to 61-75 Nm (45-55 ft- lbs) 4. Attach starter solenoid bracket to right lower frame rail with nuts. Tighten to 6-10 Nm (53-88 in-lbs ) . 7. Connect negative battery cable. Tighten to 6.8-10.8 Nm (60-96 in-lbs ) . 5.
Reinstall radiator/oil cooler assembly as required or pull radiator/oil cooler assembly into position and install and 8. Reinstall air box cover. 9. Install maxi-fuse and right side cover. 2-10 2009 VRSC Service: Chassis