No.20S025-02 8.6 Image Flip Flip the image through ReverseX and ReverseY. GenICam Parameters 8.7 Black Level This parameter sets the black level (clamp level for black signal). The lower limit of signal is clamped at this setting level. The signal does not lower than this. GenICam Parameters STC-MBS510CXP6 / STC-MCS510CXP6 Product Specifications and User’s Guide 27/49 ReverseX IBoolean Type Switch ON / OFF at Horizontal False: Horizontal Flip Off, True: Horizontal Flip On. Default: False ReverseY IBoolean Type Switch ON / OFF at Vertical False: Vertical Flip Off, True: Vertical Flip On. Default: False BlackLevel [BlackLevelSelector] IFloat Type Black Level Range: 8bits output:
0 to 31 10bits output: 0 to 127 12bits output: 0 to 511 Default: 15