No.20S025-02 8.12 ROI (Region of Interest) This sets the ROI in order to output selected area of image. The frame rate increases when reducing height of image. The frame rate does not change when reducing width of image. GenICam Parameters The parameters define as following chart. OffsetY Height STC-MBS510CXP6 / STC-MCS510CXP6 Product Specifications and User’s Guide 33/49 Width IInteger Type Horizontal (Pixel) size Range: 256 to 2,448 pixels Default: 2,448 pixels Setting steps: 8 pixels Sets the width of image. “Width + OffsetX” should not exceed maximum width. Height IInteger Type Vertical (Line) size Range: 4 to 2,048 lines Default: 1,240 lines Setting steps:
2 lines Sets the height of image. “Height + OffsetY” should not exceed maximum height. When using multi ROI, please sets total height of multiple ROIs. OffsetX IInteger Type Horizontal (Pixel) offset Range: 0 to 2,192 pixels Default: 0 pixels Setting steps: 2 pixels OffsetY IInteger Type Vertical (Line) offset Range: 0 to 2,044 lines Default: 0 lines Setting steps: 2 lines ROI Region O H OffsetX Width