Fixing the Wall Mount 1. Drill two holes with each diameter of 6 mm on the wall at the height of 99.8–101.8 cm above the ground, and ensure there is a distance of 56 mm between two holes, then insert two wall plugs into the holes. 2. Align the screw holes in the wall mount with the wall plugs, then use two screws (4Ч20 mm) to firmly secure the wall mount to the wall. Note: It is recommended to fix the wall mount near an electrical outlet so that it can easily connect to the power. 56mm Align the screw holes with the wall plugs Wall Plugs Wall Plugs Screw Holes 99.8-101.8cm 7