TRANSFER CASE - TOD 5D2-19 (1) K-LINE : It means that Communication line for coding and diagnosis with diagnostic scanning tool. SSANGYONG Y200 Classification Pin No. Pin Name Description Power Supply 17,18 4,19 Ground Input TOD control unit ground TOD control unit battery supply : (Fuse No 13,20A) Signal Input 5 Ignition Ignition ON / OFF 27 Position 1 Position encoder 1 : check of shift motor position 10 Position 2 Position encoder 2 : check of shift motor position 28 Position 3 Position encoder 3 : check of shift motor position 30 Position 4 Position encoder 4 :
check of shift motor position 9 4H/4L Switch Transfer case mode input 24 Auto T/M Neutral Check of neutral gear position in Auto T/M 12, 16 Speed Voltage Supply 5V supply (TPS / speed sensor) 11 Front Speed Front speed sensor signal input 29 Rear Speed Rear speed sensor signal input 25 ABS Operation ABS ON / OFF 26 Brake Switch Brake Switch ON/OFF Signal Input 22 CAN-L CAN bus low line 23 CAN-H CAN bus high line 20 K-LINE (1) Connect to Diagnostic Connector No. 15 Signal Output Motor LO-HI Motor output port - LO to HI : join with battery - HI to LO (or motor brake) : join with ground Motor HI-LO Motor output port - HI to LO : join with battery - LO to HI (or motor brake) :
join with ground 3 EMC TOD Output 21 4L Illumination When the transfer case is in “4L” mode, illumi- nates “4L” indicator. 6 Position Return Position encoder ground 7 Self Diagnosis Display Illuminates “4L” indicator “4WD check lamp” turns ON Upon defect ; Ground circuit 13 Speed Ground for speed sensor / TPS