5D2-20 TRANSFER CASE - TOD SYSTEM OPERATION Initial Operation of TOD Control Unit When ignition “ON”, “4L” and “4WD check” lamps illuminates for 0.6 second to check bulb in instrument panel, then perform diagnosis of system (See 3F-19 Self-Diagnosis Condition). Position Encoder The Position Encoder is used by the TOD to determine the position of the Shift Motor. Each motor position is identified by a position code below. Notice:
• All other position codes are invalid • Position Input Open Circuit (> 4.5V) = 1 • Position Input shorted to Speed/Position Return ( SSANGYONG Y200 Position Code 1/2/3/4 Motor Position Position Code 1/2/3/4 Motor Position 1110 Left Stop 1001 Neutral 1010 Left of High 0001 Zone 2 0010 High 0101 Low 0000 Right of High 0100 Right Stop 1110 Zone 1 - -