Ethernet Communication Module IFD9506 user by E-Mail. ѓ Mail settings 1. Mail alarm setup: There are 3 mail alarms to be set up. Check the boxes to enable the alarms. The alarm can be triggered by “low" and “high”. 2. SMTP server: When Alarm 1 is triggered, the E-Mail will first be sent to SMTP server, and SMTP server will send it to the designated address. For example, assume there is an E-Mail to be sent to Test@delta.com.tw, and SMTP server is 192.168.0.1, the E-Mail will be sent to SMTP server first, and the server will further send it to the recipient Test1@delta.com.tw. 3. E-Mail of sender: Maximum 63 Engligh characters are allowed. 4. Subject of E-Mail:
You can enter the text message in the column, and the message will be placed in the subject of the E-Mail and sent to the recipient. IFD9506 is able to contain 1~3 E-Mail subjects. Max. 63 English characters are allowed for each subject. 5. E-Mail of recipient: One mail can be sent to 10 addresses according to the alarm setting. Every address allows Max. 63 English characters. For example, (see the figure above) when Alarm 1 is triggered, the E-Mail will be sent to Test1@delta.com.tw. When Alarm 2 is triggered, the E-Mail will be sent to Test2@delta.com.tw. Note: To correctly send out E-Mails, there has to be a SMTP server in the network.
When we send out an E-Mail, the mail will be sent to SMTP server first, and the server will further send the mail to the designated address. DVP-PLC Application Manual 22