Ethernet Communication Module IFD9506 8.5 Monitoring Settings You can read data in designated addresses in different equipment in the network by setting up IFD9506. The data can be temporarily stored in IFD9506 for fast storing and acquisition. ѓ Setting up monitoring functions 1. Monitor bit: Device addresses for setting up the bit status of serial slave; able to read the content in the corresponding address of the designated slave. 2. Monitor word: Device addresses for setting up the word status of serial slave; able to read the content in the Note: corresponding address of the designated slave. Cache mode normally enabled, and Max. data in 16 slaves can be monitored.
When the cache mode is enabled, the data you would like to read will be sent back directly from the register in IFD9506. 3. Serial slave mode: The instruction sent from the master is received and transferred to the network. Please designate the station address and relay IP address. Device address: Address of the slave PLC Relay IP address: IP of the serial master DVP-PLC Application Manual 23