7. Body Closure Manual 7-23 Front door 7.2.3 Front door sheet metal 7.2.3.1 Removal and refitting of front door assembly Removal procedure Note: - The following is the removal and refitting of the left front door assembly, which can be referred to for the operations on the right side. - The removal of the door assembly must be performed with the assistance of another technician. 1. Turn off all electrical appliances and turn off the start switch. 2. Disconnect the battery negative terminal (refer to 3.1.6.1 Maintenance and inspection of the battery) 3. Remove the front door assembly. a. Disengage the fixing buckles of the connectors and disconnect the harness connectors. b.
Unscrew 1 fixing bolt of the front door stopper (at the side wall). Tightening torque of bolt: 20±3Nm. VOYAH FREE