Speed Sensor MD - 36 series speed sensor P 1 5 V C W C C W C O M G N D BW100 TB1 UPPER + SIG A CNST. SPD. RBSS or encoder SPEED + SIG COM OR + EXC r e d w h t b l k AUTO ZERO + SHIELD OR TASS Installation b r n b l k b l u ! Connect the BW100 TB1 – 7 to the MD - 36 series speed sensor terminal: • ‘2’ for clockwise speed sensor shaft rotation • ‘3’ for counter-clockwise speed sensor shaft rotation. MD shaft rotation is viewed from the front cover side of the MD enclosure. # If a speed sensor is not used, a jumper must be connected across the BW100 TB1 – 5 / 6. If a speed sensor is used, insure that the jumper is removed. !
Input device in the form of open collector transistor or dry contact across TB1 – 6 / 7 will also serve as a suitable speed signal. 7ML19985DJ01 Milltronics BW100 - INSTRUCTION MANUAL Page 11