hp Color 9850mfp FIXING 6. Remove the ball bearings L [1], 1 each at both sides, and the heat insulating sleeves L [2], 1 [3] 7. Reinstall the above parts following the removal each at both sides, from the fixing roller L. steps in reverse. Note: • Be sure to apply the inner and outer peripher- ies of the heat insulating sleeve with Multemp FF-RM (or, Solvent 240) before reinstalling it. • When reinstalling them, be sure to take note of the directions of the ball bearing and the flange of the heat insulating sleeve. • After replacing the fixing roller/r, check touch with the roller.
whether the fixing temperature sensor 4 is in [2] • When fixing temperature sensor 4 is soiled [1] with paper dust, clean the sensor with drum cleaner and cleaning pad. III DIS./ASSEMBLY 3-87