DISASSEMBLY/ASSEMBLY Q5686A/Q5687A 3. After removing 2 screws [1], remove the wire bracket [3] of the up/down wire [2] on the rear side from the up/down stay [4]. [2] [1] [4] [3] 4. Loosen 2 screws [2] of the belt tensioner [1]. III DIS./ASSEMBLY 5. Remove an E-ring [1], the gear [2] and the up/ down pulley /L [3], and then remove the up/ down wire [4]. [5] [3] Note: • When removing the up/down pulley L, be careful not to drop the pins [5]. Otherwise, they may get lost. [4] [1] [2] 3-14 [2] [1]