A90 series Inverter User Guide 51 F04.14 Acceleration/Deceleration Mode 0: Linear Acceleration/Deceleration 1: continuous S curve 2:
intermittent S curve 0 〇 F04.15 S Curve Start Section Time at Acceleration 0.00 - System acceleration time/2 (F15.13=0) 0.0 - System acceleration time/2 (F15.13=1) 0 - System acceleration time/2 (F15.13=2) s 1.00 ● F04.16 S Curve End Section Time at Acceleration 0.00 - System acceleration time/2 (F15.13=0) 0.0 - System acceleration time/2 (F15.13=1) 0 - System acceleration time/2 (F15.13=2) s 1.00 ● F04.17 S Curve Start Section Time at Deceleration 0.00 - System deceleration time/2 (F15.13=0) 0.0 - System deceleration time/2 (F15.13=1) 0 - System deceleration time/2 (F15.13=2) s 1.00 ● F04.18 S Curve End Section Time at Deceleration 0.00 - System deceleration time/2 (F15.13=0) 0.0 - System deceleration time/2 (F15.13=1) 0 - System deceleration time/2 (F15.13=2) s 1.00 ● F04.19 Stop Mode 0:
Ramp-To-Stop 1: Coast-to-Stop 0 〇 F04.20 DC Brake Start Frequency at Stop 0.00 - Maximum Frequency F00.16 Hz 0.00 〇 F04.21 DC Brake Current at Stop 0.0 - 150.0 (100.0= Motor Rated Current) % 100.0 〇 F04.22 DC Brake Time at Stop 0.00 - 30.00, Disabled at 0.00 s 0.00 〇 F04.23 DC Brake Field Weakening Time at Stop 0.00 - 30.00 s 0.50 〇 F04.24 Magnetic Flux Brake Gain 100 – 150 (100: No Magnetic Flux Brake) 100 〇 F04.26 Start Mode after Fault/Coast to Stop 0: by the Mode of F04.00 1: Speed Tracking Start 0 〇 F04.27 Terminal Start Command Reconfirmation 0: Not to Confirm 1: Need to Confirm 0 〇 F04.29 Zero speed threshold 0.00 – 5.00 Hz 0.25 ●