A90 series Inverter User Guide 52 F04.30 Initial Position Search after Power-on or Fault 0: Disabled 1: Enabled 1 ● F05 V/F Control Parameter Group F05.00 V/F Curve Setting 0: Straight Line V/F 1: Multipoint Polyline V/F 2: V/F to the 1.3rd 3: V/F to the 1.7th 4: Square V/F 5: V/F Complete Split Mode (Ud=0, Uq=K*t=Split Voltage Source Voltage) 6:
V/F Half-Split Mode (Ud=0, Uq=K*t=F/Fe*2*Split voltage source voltage) 0 〇 F05.01 Multipoint VF Frequency Point F1 0.00 - F05.03 Hz 0.50 ● F05.02 Multipoint VF Voltage Point V1 0.0 - 100.0 (100.0= Motor Rated Voltage) % 1.0 ● F05.03 Multipoint VF Frequency Point F2 F05.01 - F05.05 Hz 2.00 ● F05.04 Multipoint VF Voltage Point V2 0.0 - 100.0 % 4.0 ● F05.05 Multipoint VF Frequency Point F3 F05.03 - Motor Rated Frequency (Reference Frequency) Hz 5.00 ● F05.06 Multipoint VF Voltage Point V3 0.0 - 100.0 % 10.0 ● F05.07 Voltage Source of V/F Separation Mode 0: Digital Setting of V/F Separation Voltage 1: AI1 2: AI2 3~4:Not used 5: PID 6: Communication Percentage Setting Note:
Motor Rated Voltage is 100% 0 〇 F05.08 Digital Setting of VF Separation Voltage 0.0 - 100.0 (100.0= Motor Rated Voltage) % 0.0 ● F05.09 Rise Time of VF Separation Voltage 0.00 - 60.00 s 2.00 ● F05.10 V/F Stator Voltage Drop Compensation Gain 0.00 - 200.00 % 100.00 ● F05.11 V/F Slip Compensation Gain 0.00 - 200.00 % 100.00 ● F05.12 V/F Slip Filter Time 0.00 - 10.00 s 1.00 ●