User Manual of A90 Series Inverter Synthesis frequency source A Setting of main frequency source Gain of main F00.06, etc. Limit F00.04, etc. F00.10 and auxiliary frequency Synthetic gain of main Analog adjustment of synthetic frequency frequency source B Setting of auxiliary frequency source Gain of auxiliary sources (F00.12) (F00.13) F00.05, etc. F00.11 The gain type function codes (F00.10 to F00.12) are for “multiplication”, i.e. “set Fig. 7-3 Frequency Source Setting Control (Gain Description) value = original set value * gain”. Below is only the description of the analog adjustment (F00.13). F00.13=0:
synthetic frequency of main and auxiliary channels The synthetic frequency is directly set to the synthetic frequency of main and auxiliary channels. F00.13=1: AI1 * synthetic frequency of main and auxiliary channels F00.13=2: AI2 * synthetic frequency of main and auxiliary channels main and auxiliary channels”. The synthetic frequency is directly set to “AI (percentage) * synthetic frequency of For the details of AI1 and AI2, refer to the F00.04 description. They have the same meaning. 100.00% is the percentage relative to the synthetic frequency of main and auxiliary channels.
The acceleration time is the time for the output frequency to rise from 0.00Hz to the set value Fbase of F15.09 (reference frequency of the acceleration and deceleration time); and the deceleration time is the time for the output frequency to fall from Fbase to 0.00Hz, regardless of forward and reverse running. See Fig. 7-4. 125 Function Default Function code name Parameter description Unit Attribute code setting F00.14 Acceleration time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F00.15 Deceleration time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ●