User Manual of A90 Series Inverter When one function output terminal is in the single pulse output mode (see F03.05 for details), the pulse width of the active level can be controlled by setting the single pulse output time, in order to meet different process or control requirements. Details are given in Fig. 7 and Fig. 7. M1 and M2 are two multi-function analog output terminals. Their functions can be defined separately by setting the values of the function codes F03.21 to F03.22. “operating frequency (absolute value)”. The current |operating frequency| is reflected by the For example, if F03.21=0 is defined, the function of the M1 terminal is to output the output voltage.
If the operating frequency increases from 0.00Hz to 50.00Hz (assuming F00.16=50.00), the voltage of the M1 output port will increase from 0.00V to 10.00V under the default conditions, showing the same change trend. Specific options are described in Table 7-7.
Table 7-7 Function List of Multi-function Analog Output Terminal 158 Y1 output F03.19 Single pulse time of R1 output 0.001 - 30.000 s 0.250 ● Function Default Function code name Parameter description Unit Attribute code setting F03.21 Options of analog output M1 see Table 7-7 Function List of Multi-function Analog Output Terminal 0 ○ F03.22 Options of analog output M2 2 ○ Settings Function Description 0 Operating frequency (absolute value) 0.00Hz to Fmax, corresponding to the output 0.0% to 100.0% 1 Set frequency (absolute value) 0.00Hz to Fmax, corresponding to the output 0.0% to 100.0% 2 Output torque (absolute value) 0.0% to 200.0%, corresponding to the output 0.0% to 100.0% 3 Set torque (absolute value) 0.0% to 200.0%, corresponding to the output 0.0% to 100.0% 4 Output current 0.0A to 2*Ie, corresponding to the output 0.0% to 100.0% 5 Output voltage 0.0V to 1.5*Ue, corresponding to the output 0.0% to