Chapter 3: Keyboard and Operation 3.1 Keyboard layout and function specification 13 LED monitoring item indicator LED UP DW Potentiometer Stop/Reset state indicator Menu Forward Confirm modify Reverse/ jog Function indicator Shift Key Key name Key functions Menu key Enter menu while standby or running.Press this key to return while modify parameter. While standby or running, press for 1 sec to enter monitorning interface. Confirm/modify key Press to modify parameter while in menu interface.Press again to confirm aftr modify. While standby or running, press to change LED monitoring items at stop Up/down key Select parameter group in menu interface. Modify parameter while in modify interface.
Modify given frequency or PID or given torque while at standby or monitoring state（While given frequency or PID or given Shift key ） Select digit of function no modified by up/down key；Select parameter digits modified by up/dowm key. Change LED monitoring items while standby or running Forward key While run/stop is controlled by keyboard, press this key, the inverter forward rotate. Reverse/ jog key While run/stop is controlled by keyboard, press it, machine will reverse if this key is defined as REVERSE and machine will jog if this key is defined as JOG. Stop/Reset key Machine stops if press it while run/stop is controlled by keyboard. Its efficiency range is defined via function no F-07.
Inverter reset if press it in fault state(no reset if fault is not solved) Potentiometer key Can be used to adjust given frequency while it set as potentiometer adjust speed.