0 + code Enter Code **** In this example, areas 1 and 2 are disarmed. Area 1 Disarmed Area 2 disarmed You have a few seconds to enter the number of the area you want to arm. Enter Area No. 3. Enter the area number (in this example it is 1). 1 Arm Menu 4. Press the Accept key. ! Normal Set 5. Press the Accept key again. ! Normal Set " The system has identified zones in the area that are not properly closed. Open Zone(s) It then proceeds to list the open zone(s). In this example, zone 2 is open. The display is blinking. 002 Hall 6. Press "$ "$ "$ "$ to exclude a zone from the area. " Inhibit Zone ___ 7.
Press the number of the open zone, in this example ‘2.’ 2 Inhibit Zone 2 The system then confirms which zone you have excluded. 002 Hall If there still is a zone open, it will be listed, and you must again press " and the zone number to inhibit it. Is Inhibited The alarm is being set. Area 1 Arming 8. The buzzer begins to beep. You must now quit the secured area. Beeeep You must now exit the protected area by the designated exit route. Leave now The alarm is now set. Area 1 Armed Area 2 Disarmed Enter Area No. TUE 23 APR 08.22 Page 14 User Manual for CD72/95/15003