Chapter 4 Installation and Wiring - Power supply modules A power supply module functions to convert alternating current to direct current, or directly provides direct current. It provides power for the modules installed on it. A Motion backplane must `be assigned a power supply module. A power supply module has to be installed on the left-most side of a backplane. AHPS05-5A AHPS15-5A PS05 PS15 PO WER 4_ - Motion CPU module A Motion CPU module is the core of a complete AH Motion system. It is responsible for controlling and managing the whole system, and is installed in the second slot from the left on the Motion backplane.
AHxxEMC-5A 10EMC ERRO R ERRO R RUN RUN ETH ETH Et he rC AT CN 1 R UN S TO P Ethernet E ther CAT M ic ro S D - Communication cables Several communication interfaces are built in a Motion CPU module. You can select a suitable communication cable according to the required application. Refer to the following table for information about the communication interfaces and the main applications. 4-3 face Connector Application rCAT RJ45 Industrial network connecting EtherCAT slaves rNet RJ45 Computer/HMI communication/remote control/data exchange/industrial network 232 Mini USB Programming 485 Terminal block Programming