Chapter 4 Installation and Wiring *1. If the frequency of input signals received by an input terminal must be 200 kHz, the input terminal must be connected to a 1 kΩ (2 W) resistor in parallel. 4.6.2 Wiring AHxxEMC-5A 4_ External devices for AHxxEMC-5A SD 4-27 Terminal Description Response characteristic Rated input Current Voltage X1.2, X1.3 X1.0 and X1.1 are for counter 4. X1.2 and X1.3 are for counter 5. High-speed capture: The terminals can function as trigger signals for high-speed captures. Interrupt inputs: X0.12, X0.13, X0.14 and X0.15 can function as interrupt inputs. Y0.8, 1. Pulse output temrinals (open collector). 2. The function of the terminals: High-speed comparison:
The terminals can function as high-speed comparison outputs. 200 kHz 15 mA 24 V Y0.9, Y0.10, Y0.11 MDR36 connector External terminal module RJ45 (EtherCAT) 10EMC RUN ERROR ETH Ethe rCAT USB MicroSD N1 S TO PR UN C M ic ro S D T EtherCA net ther E RJ45 (Ethernet)