Important Instructions > Important Safety Instructions > Setting Up the Printer Important Safety Instructions Setting Up the Printer ❏ The printer is heavy and should not be lifted or carried by one person. When lifting the printer, two people should assume the correct positions as show below. ❏ When moving the printer, always keep it horizontal. ❏ If you are unable to insert the AC plug into the electrical outlet, contact an electrician. ❏ Do not connect to an uninterruptible power source. If you connect to one, it may cause malfunctions or damage. ❏ Be sure the AC power cord meets the relevant local safety standards. Use only the power cord that comes with this product.
Use of another cord may result in fire or electric shock. This product’s power cord is for use with this product only. Use with other equipment may result in fire or electric shock. ❏ If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses in the plug, make sure you replace them with fuses of the correct size and rating. ❏ Use a grounded outlet that matches the printer’s power plug. Do not use an adapter plug. ❏ Avoid using an electrical outlet that is controlled by wall switches or automatic timers. Accidental disruption of power can erase valuable information in your computer’s and printer’s memory.
❏ Make sure that there is no dust on the socket. ❏ Be sure to insert the plug completely into the electrical outlet. ❏ Do not handle the plug with wet hands. ❏ Unplug this printer from the wall outlet and refer servicing to a qualified service representative under the following conditions: 12 A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into it.