AL-M320DN/AL-M310DN/AL-M220DN User's Guide Getting to Know Your Printer Using the Control Panel C Press the r Right button to view the items in a menu. Depending on the menu, the LCD panel displays an item and the current setting separated ( YYYY=ZZZZ ), or only an item ( YYYY ). When to make control panel settings D Use the u Up and d Down buttons to scroll through the items, or press the l Left button to return to the previous level. In general, printer driver settings override settings made using the control panel. You should make the following settings by using the control panel because these settings cannot be made in the printer driver.
E Press the r Right button to carry out the operation indicated by an item, such as printing a configuration status sheet or resetting the printer, or to view the settings available for an item, such as paper sizes or emulation modes. ❏ Settings to select emulation modes and IES (Intelligent Emulation Switching) mode ❏ Settings to specify a channel and configure the interface Use the u Up and d Down buttons to scroll through available settings, then press the r Right button to select a setting and return to the previous level. Press the l Left button to return to the previous level without changing the setting.
❏ Settings to specify the size of the memory buffer used to receive data For AL-M220DN, which does not have an LCD panel, you can do the control panel settings using EpsonNet Config. See “How to access the control panel menus (AL-M220DN)” on page 17 . Note: ❏ You need to turn the printer off and then on to activate the settings you changed in the Network Menu , USB Menu or RAM Disk in the Setup Menu . How to access the control panel menus (AL-M320DN/ AL-M310DN) ❏ The OK button can be used instead of the r Right button in step 3 or 5. Note: Some menus and items appear only when a corresponding optional device is installed or an appropriate setting has been done.
F Press the l Left button once or more times to exit the control panel menus. How to access the control panel menus (AL-M220DN) A Press the r Right button to access the control panel menus. Although there are no panels that can display menus, you can do settings that correspond to the operation panel menus from a computer that is connected to the printer. You can do the settings using the following procedure. B Use the u Up and d Down buttons to scroll through the menus. From EpsonNet Config (web version) You can do settings when the printer is connected to the network. The method to open the settings screen is shown below. 17