AL-M320DN/AL-M310DN/AL-M220DN User's Guide Getting to Know Your Printer 22 Item Explanation Start Page Specifies whether duplex printing starts from the front or back of the page. For the paper sizes for which duplex printing is available, see “Available Paper and Capacities” on page 39. Settings (default in bold): Front, Back Skip Blank Page Enables you to skip blank pages when printing. This function is available only for ESCP2, FX, or I239X mode. Settings (default in bold): Off, On Auto Eject Page Specifies whether or not to eject paper when the limit specified in the I/F Time Out setting is reached. The default is Off, which means paper is not ejected when the time-out limit is reached.
This function is not available in PS3 and PCL. Settings (default in bold): Off, On Size Ignore If you want to ignore a paper size error, select On. When you turn this item on, the printer keeps printing even if the image size exceeds the printable area for the specified paper size. This may cause smudges because of the toner that is not transferred onto the paper properly. When this item is turned off, the printer stops printing if a paper size error occurs. Settings (default in bold): Off, On Auto Cont When you turn this setting on, the printer automatically continues printing after a certain period of time when one of the following errors occurs:
Set Paper, Print Overrun, or Memory Overflow. When this option is off, you must press the OK button to resume printing. Settings (default in bold): Off, On Page Protect Allocates additional printer memory for printing data, as opposed to receiving it. You may need to turn this setting on if you are printing a very complex page. If a Print Overrun error message appears on the LCD panel (AL-M320DN/AL-M310DN), or on the computer screen while printing, turn this setting on and reprint your data. This reduces the amount of memory reserved for processing data so your computer may take longer to send the print job, but it will allow you to print complex jobs.
Page Protect usually works best when Auto is selected. Note: ❏ Changing the Page Protect setting reconfigures the printer’s memory, which causes any downloaded fonts to be deleted. ❏ This function is available only for ESCP2, FX, or I239X mode. Settings (default in bold): Auto, On