Chapter 4: Troubleshooting Chapter 4 Troubleshooting 1. Problem: The AOC-LPZCR2 BIOS does not show up in POST. Recommended Solutions: • Make sure that the system has enough expansion ROM to initialize the card. Remove other add-in cards if possible. • Make sure that the card is properly and fully seated in the PCI green slot. • Check if the motherboard's BIOS is updated. (You can download a updated BIOS from our web site at: www.supermicro.com.) 2. Problem: I cannot see the card in the operating system. Recommended Solutions: • Make sure that the card is shown in POST. If the card is shown in POST, a screen shown below will display.
If it is not shown in POST, please fi nd out the root cause of the problem by following the steps listed above. • Make sure that the driver for the card is installed in the system. 4-1