DO NOT wear loose clothing or jewelry when working on an engine. DO NOT connect or disconnect any test equipment while the ignition is on or the engine is running. EN DO NOT disassemble the code reader. Engine parts will become hot when the engine is running.To prevent severe burns avoid contact with hot engine parts. When an engine is running, it produces carbon monoxide, a toxic gas. Operate the vehicle ONLY in a well-ventilated area. Wear eye protection that meets ANSI standards. Cautions Please ensure that the vehicle battery is fully charged and the scanner is firmly connected to the vehicle DLC to avoid erroneous data generated by the scanner and diagnostic systems.
Please do not use the code reader while driving. Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts. Keep the scanner dry, clean, free from oil/water, or grease. Use a mild detergent on a clean cloth to clean the outside of the scan tool, when necessary. Keep the scanner out of the reach of children. FAQ Q : Why does the ArtiDiag900 BT have no responses when it is connected to a car? A :
Check if the connection with the vehicle diagnostic socket is solid, or check if the ignition switch is on, or if the tool supports the car.Check whether the version of the scanner and VCI is the latest (if not, try again after updating), and check what indicator is on the VCI (refer to the indicator description in the user manual). Q : Why does the system stop when reading the data stream? A : This may be caused by the loose diagnostic VCl dongle. Please unplug the VCI dongle, and make sure the reconnection is stable and solid. 25