4.2 Erase Codes This option erases the codes from the vehicle, after retrieving codes from the vehicle and certain repairs have been carried out. Select [Erase Codes] and press [OK], then follow the prompts on the screen to finish the procedure. The result may be shown as follows: *Note: Be sure the vehicle’s ignition key is in the ON position with the engine off. 4.3 I/M Readiness This option checks whether or not the various emissions-related systems on the vehicle are operating properly, and are ready for Inspection and Maintenance testing. It can also be used to check the Monitor Run Status, and to confirm if the repair of a car fault has been performed correctly.
Select [I/M Readiness] and press [OK]. The result may be shown as follows: I/M Readiness HTR 14