Chapter 6 Applied Instructions 6_ Symbol S 1 : Signal input device S 2 : Number of input pulses S 3 : Pulse input frequency S 4 : Denominator (output frequency) for the proportion of the input frequency and output frequency S 5 : Numerator (input frequency) for the proportion of the input frequency and output frequency D 1 : Pulse output device D 2 : Pulse output frequency Explanation 1. This instruction specifies the catch speed and proportional output. S 1 can only specify X0.0, X0.2, X0.4, X0.6, X0.8 instruction if the input points are the points specified for S 1 above.
After you select the input points, the high-speed and X0.10 as the input points, and the operand occupies two consecutive input points. You cannot execute the counter is automatically specified. If there is a DCNT instruction (API 1004) with the same high-speed counter in the 6-825 API Instruction Operand Description 2708 CSFO S1,S2,S3,S4,S5,D1,D2 Catch speed and proportional output Device X Y M S T C HC D FR SM SR E K 16# “$” F S1 S2 S3 S4 S5 D1 D2 BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S1 S2 S3 S4 S5 D1 D2 Pulse Instruction 16-bit instruction 32-bit instruction - AS -