Delta Electronics — 6.27.2 Explanation of CANopen Communication Instructions

AS Series Programming Manual SM1652 is ON, it indicates Servo-ON. 3. When M2 changes from OFF to ON, servo 2 moves from the current position to the absolute position 100,000 PUU at 100.0 rpm. The finish flag SM1632 is ON when the target position is reached. _6 Example 2 1. Add one line to the program in Example 1. When the PLC runs and SM1662 is ON, the function is enabled for servo 2 to go back and forth. 2. As the figure shows below, the servo moves from its current position (20,000) to the absolute target position (100,000) after M2 is ON. After that, it goes back and forth between the absolute position 100,000 and 0.

The direction indication flag SM1672 is ON when the servo goes toward the target position for the first time after Servo-ON. After that, the flag repeats the state, changing from ON to OFF. 6-912