AS Series Programming Manual SM1090, SM1091, SM1106-SM1109, (SM1110, available for firmware V1.06.00 or later) _2 Series Operation Manual. For the error codes, the corresponding LED indicators, and other troubleshooting, Refer to Chapter 12 in the AS300 19. Email settings SM1113, SM1116-SM1155 If the sending an email fails, the flag of the email service error SM1113 is ON. The following table lists the triggers for sending email and the corresponding flags (SM1116–SM1155). 2-120 SM Function Action SM1090 TCP connection is busy. ON: TCP connection timeout SM1091 UDP connection is busy. ON:
UDP connection timeout SM1110 AS-FEN02 Ethernet - Filter Setting Error When the program is downloaded to the PLC SM1106 Ethernet connection error ON: PHY initialization fails. OFF: PHY initialization succeeds. SM1107 Ethernet basic setting error ON: basic setting error OFF: correct basic setting SM1109 TCP/UDP socket local port is already used. ON: the same port in use Item Function Trigger 1 Trigger 2 Trigger 3 Trigger 4 Email service SM1116 SM1126 SM1136 SM1146 ON: enabled, OFF: disabled Email sending SM1117 SM1127 SM1137 SM1147 ON: sending email now, OFF: email sent Emails sent successfully SM1119 SM1129 SM1139 SM1149 ON:
email sent successfully Email sending error 1 SM1120 SM1130 SM1140 SM1150 The email cannot be sent due to email content error SMTP response timeout SM1122 SM1132 SM1142 SM1152 After sending the email, the SMTP server response timeout. SMTP server response error SM1123 SM1133 SM1143 SM1153 After sending the email, the SMTP server response error. Email sending error 2 of SM1124 SM1134 SM1144 SM1154 After sending the email, the size of the attachment exceeds the limit. Email sending Error 3 SM1125 SM1135 SM1145 SM1155 After sending the email, the attachment is not found, SM1125 is ON.