Version Revision Date 5 t h 1. Added AS300/AS200 Series CPU module descriptions in section 1.1.2 Model Description. 2. Added and updated SM and SR in chapter 2: SM230-SM261, SM585-SM587, SM1110, SM1685, SR652-SR655, SR791-SR806, SR811-SR818, SR823-SR824, SR1015, SR1520-SR1540, SR1559-SR1592, SM76-SM91, SM168-SM171, SM455, SM1006-SM1031, SM1184-SM1199, SM1216-SM1231, SM1248-SM1263, SM1271-SM1299, SM1424-SM1439, SM1681, SM1709-SM1919, SR166-SR179, SR182-SR183, SR187-SR188, SR215-SR216, SR1000-SR1014, and SR1435-SR1511. 3. Added and updated instructions in chapter 3: API0602, API1417, API2304, API2724, API2812-API2816, API0711, API1110, API1111, API1402, API1407, API1408, and API1416. 4.
Added information of using index registers in interrupt instructions in section 4.4. 5. Updated instructions in chapter 5: PED, APED, OPED, NED, ANED, ONED, PLS and PLF. 6. Updated instructions in chapter 6: API0602, API1417, API2304, API2724, API2812-API2816, API0018-API0023, API0708-API0711, API1004-API1007, API1110, API1111, API1226, API1402-API1410, API1415-API1416, API1816, API2200, API2201, API2203, API2208, API2210-API2212, API2300-API2302, API2704, API2706-API2709, API2712-API2716, API2719, API2800, API2803, API2805 and API2807. 7. Updated emergency information in section 7.3.1 and 7.3.2. Added error codes 2030 and 2031. 2019/5/10 6 t h 1.
Manual corrections on the descriptions of function codes K5566 and K5577 of SR36 and SR412 and SR415 in chapter 2. 2. Updated the descriptions in SM1375~SM1447 in chapter 2. 3. Updated the descriptions in SR1000~SR1006 in chapter 2. 4. Updated the descriptions in the error code 16#00xx in chapter 2. 5. Added a maximum input frequency table in DCNT instruction (API1004) in chapter 6. 6. Updated the acceptable input range for S 1 in PWD instruction (API1009) in chapter 6. 7. Update the alignment mark function charts in DDRVM instruction (API2709) in chapter 6. 8. Added an example of using abort symbols and completion flags in TPO instruction (API2718) in chapter 6. 2019/6/21