Chapter 6 Applied Instructions Five bits as a group is shifted to the right. 5 4 3 1 2 Additional remarks 1. If S + n 2 -1 or D + n 1 -1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If n 1 not between 1–1024, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. If n 2 is not between 1– n 1 , the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 6_ 6-301 X0.4 X0.3 X0.2 X0.1 X0.0 M15 M14 M13 M12 M11 M10 M9 M8 M7 M6 M5 M4 M3 M2 M1 M0