AS Series Programming Manual 2. The operand n must be between 1 – 256. 3. Only the 32-bit instructions can use the 32-bit counter, but not the device E. Example 1. When X0.0 is ON, the instruction compares the values in D10 – D19 with the value in D0, and stores the comparison results in D50 – D54. When the equal value does not exist in D10 – D19, the values in D50 – D52 are 0. 2. The instruction stores the data number of the minimum value in D53, and stores the data number of the maximum _6 value in D54. If there is more than one minimum value or maximum value, the instruction stores the data number that is bigger.
6-338 Device Description D Number of equal values D+1 Data number of the first equal value D+2 Data number of the last equal value D+3 Data number of the minimum value D+4 Data number of the maximum value