Delta Electronics — 6.16.2 Explanation of Floating-point Number Instructions

AS Series Programming Manual Example When X0.0 is ON, the BIN instruction converts the binary-coded decimal value in X1.15–X1.0 into the binary value, and stores the conversion result in D0. The FLT instruction converts the binary value in D0 into a floating-point number, and stores the conversion result in (D11, D10). The FRAD instruction converts a floating-point number in (D11, D10) into radians, and stores the conversion result in (D21, D20). The FSIN instruction finds the sine of the radian value in (D21, D20), and stores it in (D31, D30). The sine value is a floating-point number.

X1.15~X1.0 D0 D11~D10 BIN FLT _6 Floating-point number Binary-coded decimal value R90 90 Binary value FRAD FSIN D21~D20 R1 D31~D30 Floating-point number Floating-point number R1.570796 Additional remarks 1. If the value in S exceeds the range of values that can be represented by floating-point numbers, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2013. 2. If SM695 is ON, and the value in S is not between 0–360, the instruction is not executed, SM0 is ON, and the error code is 16#2003. 6-458 0 0 9 0