Chapter 2 Devices 2_ 2-59 Special auxiliary Refresh time relay SM548–SM551 You set the flag to ON or OFF. SM552 The system sets the flag to ON or OFF. SM553 The system sets the flag to ON and you reset it to OFF. SM554–SM557 You set the flag to ON or OFF. SM558–SM559 You set the flag to ON or OFF and the system sets the flag to OFF. SM560 The system sets the flag to ON or OFF. SM561 The system sets the flag to ON and you reset it to OFF. SM562–SM564 You set the flag to ON or OFF. SM565 The system sets the flag to ON and you reset it to OFF. SM566 You set the flag to ON or OFF. SM567 The system sets the flag to ON and you reset it to OFF. SM568–SM569 You set the flag to ON or OFF.
SM572 The system sets the flag to ON or OFF. SM573 The system sets the flag to ON and you reset it to OFF. SM574 You set the flag to ON or OFF. SM578–SM579 You set the flag to ON or OFF and the system sets the flag to OFF. SM580 You set the flag to ON and the system resets it to OFF. ON: disable high-speed output SM585 You set the flag to ON or OFF and the system sets the flag to OFF. SM586--SM587 You set the flag to ON or OFF. SM600–SM602 The system automatically sets the flag to ON and resets it to OFF. The flag is refreshed when the instruction is executed. SM604 You set SM604 to ON and reset it to OFF. ON: sort in descending order OFF:
sort in ascending order SM605 You set SM605 to ON and reset it to OFF. SM606 You set SM606 to ON and reset it to OFF. ON: 8-bit mode OFF: 16-bit mode SM607 You set the flag to ON or OFF. SM608 The flag is refreshed when the instruction is executed. SM609 You set the flag to ON or OFF. SM610–SM611 The flag is refreshed when the instruction is executed. SM612–SM613 You set the flag to ON or OFF. SM614 The flag is refreshed when the instruction is executed. SM615–SM617 You set the flag to ON or OFF. SM618 The flag is refreshed when the instruction is executed. SM619 The flag is refreshed when the EI or DI instruction is executed.
SM620 The flag is refreshed when the CMPT instruction is executed. SM621–SM686 You set the flag to ON or OFF. SM687 The flag is refreshed when the RAMP instruction is executed. SM688 The flag is refreshed when the INCD instruction is executed. SM690–SM691 You set the flag to ON or OFF. SM692 The flag is refreshed when the HKY instruction is executed. SM693 The flag is refreshed when the SEGL instruction is executed. SM694 The flag is refreshed when the DSW instruction is executed.