Wiring ASDA-B3 C9: output for encoder position signal (line driver) Controller Servo drive Max. output current 20 mA 3 Note: 1. It is suggested that you connect the two GND for the controller and servo drive in parallel when the voltage deviation between the controller and the servo drive is too great. 2. The pin definition of the communication type models is different from that of the L model. Communication type model pins: OA (1), /OA (2), OB (11), /OB (12), OZ (3), and /OZ (4). C10: output for encoder position signal (opto-isolator) Controller Servo drive Max. output current 20 mA Note: the pin definition of the communication type models is different from that of the L model.
Communication type model pins: OA (1), /OA (2), OB (11), /OB (12), OZ (3), and /OZ (4). 3-54 AM26C31 series OA /OA OB /OB OZ /OZ 21 120 Ω 120 Ω 120 Ω SG 22 25 23 13 24 AM26C31 series OA /OA OB /OB OZ /OZ 21 200 Ω High speed photocoupler 200 Ω High speed photocoupler 200 Ω High speed photocoupler SG 22 25 23 13 24