2 Installation Follow the instructions in this chapter during installation. This chapter includes information about the circuit breaker, fuse, EMI filter selection, and the regenerative resistor.
2.1 Ambient storage conditions ·································································· 2-2 2.2 Ambient installation conditions······························································ 2-3 2.3 Mounting direction and space ······························································· 2-4 2.4 Safety precautions for using motors ······················································· 2-6 2.4.1 Troubleshooting for the motor operation and status ····························· 2-8 2.4.2 Mounting directions and precautions for the servo motor ······················ 2-9 2.4.3 Precautions for using servo motor with oil seal ································· 2-10 2.4.4 Precautions for using couplings ···················································· 2-10 2.4.5 Oil and water prevention measures for the servo motor ·······················2-11 2.4.6 Measures to suppress temperature increase of the servo motor ·········· 2-12 2.5 Specifications for the circuit breaker and fuse ········································ 2-13 2.6 Installation requirements for EMC ······················································· 2-14 2.6.1 EMI filters ················································································ 2-15 2.7 Selecting the regenerative resistor ······················································ 2-17 2.8 The use of braking ··········································································· 2-22 2-1