ASDA-B3 Installation Operation AC servo motor operation is controlled by the servo drive. Do not directly connect a commercial type power supply (100/200V, 50/60 Hz) to the servo motor circuit; otherwise 2 the motor cannot operate normally and may be permanently damaged. Follow the motor specifications when using the product. The motor’s operation temperature must not exceed the specified range. The material of the motor shaft is not rustproof. To ensure a longer motor life, apply rustproof oil during operation. The built-in brake is for clamping rather than stopping the motor. Caution: the built-in brake is not a device for safely stopping the machine.
Install another safety device for stopping the machine. When the built-in brake is clamping the motor, rotation backlash can still occur and the maximum rotation is 1° to 2°. When a motor with a brake is operating, the brake lining sometimes generates a noise (a swishing or clicking sound), which is caused by the structure of brake module, not a malfunction. It will not affect the motor’s function. When using a servo motor with a brake, do not use the brake for dynamic braking. If any odor, noise, smoke, heat, or abnormal vibration occurs during motor operation, stop the motor and turn off the power immediately. Others Delta servo motors have no user-replaceable parts.
Do not disassemble the motor or change its parts, or it will void the warranty. Do not disassemble the motor by yourself, or it may lead to permanent malfunction or damage. Do not splash any water or oil on the product. 2-7