ASDA-B3 Installation 2.4.2 Mounting directions and precautions for the servo motor You can install the servo motor horizontally or vertically. 2 Note: if you install gears on the servo motor, follow the manufacturer’s instructions for installation. 2-9 Mounting direction Precautions Horizontal If you are using a servo motor with an oil seal, refer to Section 2.4.5 for oil and water prevention measures for the servo motor. Vertical - shaft end up ( 1) Do not operate the servo motor with oil seal in the vertical direction. When wiring, install an oil trap (marked as (1) in the figure on the left) to prevent vapor from entering the motor.
When installing the servo motor in a machine (such as in a gearbox), adhere to the measures in Section 2.4.5 to prevent oil and gas from entering the servo motor. Vertical - shaft end down If you are using a servo motor with an oil seal, refer to Section 2.4.5 for oil and water prevention measures for the servo motor.