ASDA-B3 Installation 2.5 Specifications for the circuit breaker and fuse 2 Note: 1. In the servo drive model column, 1 represents the product series and 2 represents the model code. The above table includes the B3, B3A, and B3B series. 2. Operation mode: general. 3. If the servo drive is equipped with a residual-current device (RCD) for electricity leakage protection, select a circuit breaker with sensitivity of at least 200 mA and with minimum 0.1 sec working time to avoid incorrect operation of the RCD. 4. Select Type B residual-current device (RCD) with time delay if the system ground wire may contain DC electricity. 5.
Use the fuse and circuit breaker that comply with the UL / CSA standard. 2-13 Servo drive model Circuit breaker Fuse (Class T) 5A 5A 10A 10A 15A 20A 30A 30A