Inspection A Default Category with an AND operator is created when the tool is created. l If the category has an AND operator, an instance must pass every filter in the cat- egory. l If the category has an OR operator, the instance only needs to pass one of the cat- egory's filters. l The category to which an instance is assigned is listed in the Category column of the Results section. If an instance fails all categories, the Results section displays Unassigned in the Cat- egory column. You can change the name and operator of a category by clicking Edit when the category is selected, or by double-clicking the category name.
Up/Down Arrows ( ) Because instances are put into the first category they qualify for, it makes the order of the categories in the Configuration section important. The Up and Down arrows are used to move the categories up or down relative to the other categories. l If the selected category or filter is at the top of its list, the Up-Arrow will be greyed-out. For the bottom category, the Down-Arrow will be greyed- out. l Although the arrows move the filters, too, the order of filters within a cat- egory is not significant. l The arrows do not move filters between categories. NOTE :
The location results associated with each category are exposed to ACE Sight in a separate frame index for each category. The first category is associated with frame 1, the second category with frame 2, and so on. Filters Each filter has a name and belongs to a category. You cannot add a filter until a category has been added, and either the category or a filter in the category is selected (+Filter will be greyed-out). Filters define the inspection/comparison that will be performed. You can define multiple filters within each category. The inspection performed by a filter is displayed in the Description field of the Configuration section, shown in Inspection Tool Object Editor .
A filter can be modified by selecting the filter and clicking Edit, or by double-clicking the filter in the Configuration section. When a filter is added or edited, the following editing form is dis- played: ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 539