Watch Variable Tool Watch Variable Tool The Watch Variable tool is used to monitor specified V+ global and local variables while debugging a V+ pro- gram or to monitor ACE variables. The Watch Variable tool stores the last defined list to the connected controller. Then, when the tool is opened, it retrieves the stored list from the controller and displays it as described below. To open the Watch Variable tool from the ACE menu, select: View > Watch Variable Watch Variable Tool NOTE: The variables on the list are sorted by: Source, Type, then Name. This allows variables from dif- ferent controllers to be grouped together.
ACE variables can be added to the watch list by dragging and dropping the variable from the Workspace Explorer to the Watch Variable list. V+ variables can be added by: l right-clicking a variable in the V+ Editor/Debugger tool and selecting "Add to Watch" l using the Variable Browser window In the Watch Variable tool: l Use the toolbar icons to select, scan, and delete variables, clear the list, etc. Each icon is described below: ACE User's Guide, 3.6.x 18316-000 Rev A Page 794 Icon Description Continuous Scan – updates all displayed variables continuously. The scan rate varies depending on controller type and number of variables displayed.