omron — Editor Parameters

Editor Parameters Physical Parameters Group The Physical Parameters group is used to define the size of the conveyor belt and its location in the work- space, as follows: NOTE: This information can be automatically generated by using the Workspace Referencing feature on the ACE Tools menu. For details, see Workspace Positioning on page 945. ACE User's Guide, 3.6.x 18316-000 Rev A Page 814 Item Description ) to toggle the signal state. Fast/Slow If your conveyor belt supports a fast and slow speed, enter the digital I/O signal number to use for toggling the conveyor belt between fast to slow speed. When the signal is on, the conveyor belt operates at its fast speed.

Click the signal icon ( / ) to toggle the signal state. Reverse/Forward If your conveyor belt supports switching between forward and reverse, enter the digital I/O signal number to use for toggling the conveyor belt between forward and reverse. When the signal is on, the conveyor belt operates in reverse dir- ection. Click the signal icon ( / ) to toggle the signal state. Drive Fault If the belt control fails, this indicator lights to show there is an error. The following items are added when emulation mode is enabled. Fast Speed Specifies the millimeters per second used when "fast" speed is enabled. NOTE: This control is always available, even when "Active Control" is dis- abled.

Slow Speed Specifies the millimeters per second used when "slow" speed is enabled. Allow Automatic Positioning When selected, enables automatic positioning of the belt object below the belt window in the workspace. NOTE: This option ensures the belt is "below" the belt window. It only moves the belt in the "below" direction and never in the "above" direction. There- fore, if you position the belt window lower and the belt position is adjusted down, if you then move the belt window up, the belt object is not moved up. Item Description Workspace Loca- tion Enter the location of the conveyor belt in the workspace. The location is rep- resented in World coordinates.