Objects in the Workspace Configuration Device ACE User's Guide, 3.6.x, 18316-000 Rev A Page 89 Object Description Data Mapper Creates a Data Map object in the workspace. This can be used to map inform- ation between objects in the workspace. Note Creates a Note object (similar to Windows Notepad), which is used to type notes about the application. The Note objects are saved as part of the ACE workspace. For details, see Note Editor on page 113. Recipe Manager Creates a Recipe Manager object, which is used to create and manage pro- duction recipes. For details, see Recipe Manager on page 983.
System Startup Creates a System Startup object, which is used to specify various ACE software start-up options. Only one System Startup object may exist in the workspace. For details, see System Startup Editor on page 119. User Manager Creates a User Manager object, which is used to configure users and access levels. Only high-level access users may edit user information. Only one user manager may exist in the workspace. For details, see User Manager Editor on page 125. Object Description Cobra i-Series Creates a Cobra i-Series robot object, which represents a robot. For more details on the Cobra i-Series, see Cobra i600/i800 Robot Configuration on page 265.
Controller Robot Creates a Robot object, which represents a robot. These will typically not need to be created, since they are automatically added to the workspace when you connect to a controller. Feeders ê AnyFeeder Creates an Adept AnyFeeder object, which represents that feeder. The editor contains parameters and controls for setup and test of the feeder. For details, see Adept AnyFeeder Object on page 138. IO Feeder Creates an IO Feeder object, which represents that feeder. The editor contains parameters and controls for setup and test of the feeder. For details, see IO Feeder Object on page 148.
SmartController Creates a SmartController object, which represents an Adept Smart Controller. These will typically not need to be created, since they are automatically added to the workspace when you connect to a controller. For details, see Controller