en Rails 11 Rails To thoroughly clean the rails and the cooking compart- ment, or to replace the rails, you can remove the rails. 2. Swing the rail round further and pull it out of the rear holes in the side panel. 11.1 Detaching the rails The rails are each fixed to the side panels of the cook- ing compartment at 3 points. 1. Grip the front of the rail and pull it round to the middle of the cooking compartment. a The front hook of the rail comes out of the hole. 3. Remove the rail from the cooking compartment. 11.2 Attaching the rails 1. Insert the hooks of the rail into the rear holes in the side panel. 2. Push the front hook of the rail into the hole.
12 Appliance door With good care and cleaning, your appliance retains its appearance and remains fully functioning for a long time to come. This will tell you how to clean the appli- ance door. Note: To ensure that the appliance door does not come into contact with the fitted unit, the appliance door opens slightly less than 90°. 2. 12.1 Removing the door panels To facilitate cleaning, you can remove the glass panels from the appliance door. WARNING ‒ Risk of injury! Scratched glass in the appliance door may develop into a crack. ▶ Do not use any harsh or abrasive cleaners or sharp metal scrapers to clean the glass on the oven door, as they may scratch the surface.
The locking pins must be fully inserted into the holes in the hinges. 3. Use both hands to lift the lower section of the inner 1. Open the appliance door fully. panel until the fastening pins come out of the holder. 4. Carefully lift the top section of the inner panel until the fastening pins come out of the holder. 14 Use the security pins to lock hinges. the left- and r