Troubleshooting en 5. Lift out the inner panel and set it down carefully on a 4. Lift the appliance slightly and pull it out completely. flat surface. 6. Clean the door panels with glass cleaner and a soft cloth. 12.4 Attaching the appliance door 12.2 Fitting the door panels WARNING ‒ Risk of injury! If the hinges are not secured due to an incomplete lock, they can snap shut with great force. ▶ If the hinge snaps shut when detaching or attaching the appliance door, do not reach into the hinge. ▶ Call customer service. If a door pane or appliance door has not been installed correctly, this is dangerous.
▶ Make sure that all of the door panes and the appli- ance door have been correctly fitted before you switch the appliance back on again. 1. Insert the inner panel. All four fastening pins must engage in the holders provided for them. 2. Remove the locking pins and close the appliance door. Note: Do not throw away the locking pins. Store the locking pins in a secure location. You always require the locking pins when you remove the door or door panels from the appliance. If you do not have any lock- ing pins, you can order these from customer service. 1. Grip the appliance door on either side with both 12.3 Detaching the appliance door hands. 2.
Slide the hinges into the slots in the appliance. If it is particularly dirty, you can remove the appliance door to clean it more thoroughly. 1. Open the appliance door fully. 2. Use the security pins to lock the left- and right-hand hinges. The locking pins must be fully inserted into the holes in the hinges. 3. Grip the appliance door on either side with both hands and close it by approx. 30 degrees. The notch below the hinges must engage into the frame of the appliance. 3. Lower the appliance door downwards. 4. Remove the locking pins. Note: Do not throw away the locking pins. Store the locking pins in a secure location.
You always require the locking pins when you remove the door or door panels from the appliance. If you do not have any lock- ing pins, you can order these from customer service. Do not close the appliance door fully. The hinges could become bent and the enamel could be dam- aged. 13 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. WARNING ‒ Risk of electric shock! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufac- turer's Customer Service or a similarly qualified per- son in order to prevent any risk. WARNING ‒ Risk of injury! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ If the appliance is defective, call Customer Service. → "Customer Service", Page 17 15