POWER TAKE OFF 00-29 Tighten: Lock nut to 20 N m (2.0 kg m / 14 lb ft) Legend 1. Control cable 2. Cable holder 3. Oil pump portion 4. Special nut 5. Lock nut 6. Truck rear 1) Loosen the special nut and move it toward the truck rear, then set the control cable free. 2) Manually holding the control cable, take in and out the cable to the front and rear. Obtain the length “L3” and temporarily tighten the special nut securing the control cable manually. “L3” = “L2” basic value + Special Nut Thickness (10 mm) NPA0062E Legend 1. Control cable 2. Cable holder 3. Oil pump portion 4. Special nut 5. Outer threaded portion 6. Lock nut 7. Truck front 3.
As a result of measurement, if the length “L2” does not satisfy a basic value, adjust the control cable according to the following procedure. NPA0064E Legend 1. Control cable 2. Cable holder 3. Oil pump portion 4. Special nut 5. Lock nut 6. Truck rear 3) Measure the length “L2” in the state of (2). If the dimension does not satisfy a basic value, re- peat Items (2) and (3) and adjust so that the “L2” will be set to the basic value. 4) After having the length “L2”, tighten the special nut at a specified torque. NPA0063E Tighten: Special nut to 142 N m (14.5 kg m / 105 lb ft)