00-36 POWER TAKE OFF * After having tightened the joint using a recom- mended value, additionally tighten it if there is a leak of oil. NPA0081E Legend 1. Cable holder 2. PTO 3. Bolt 4. Control cable After having adjusted the control cable and having inspected or adjusted the amount of spool extrusion, tighten the bolt and the special nut and lock nut of the control cable at a speci- fied torque. NPA0080E Legend 1. Low-pressure hose 2. High-pressure hose Tighten: Bolt to 24 N m (2.4 kg m / 17 lb ft) Special nut to 206 N m (21 kg m / 152 lb ft) Lock nut to 21 N m (2.1 kg m / 15 lb ft) 6. Control Cable 7. Cable Holder 8. Bolt (Cable Holder) Notice:
Install the control cable and cable holder in the PTO in accordance with Items 1 to 4 of “Installation” of Removal and Installation of Control Cable for Rear Dump Truck, and after installation, inspect and adjust the spool amount in accordance with the “Amount of Spool Extru- sion” described previously. NPA0082E Joint Torque N⋅m (kg⋅m / lb⋅ft) Item Size Torque High-pressure side PF1/2 103 (10.5 / 76) Low-pressure side PF3/4 147 (15 / 108)